How The Function Button Works - Microtek FileScan 3125c User Manual

NOTE:
1. When you have finished the settings for the function buttons in the interface,
2. If ScanWizard DI is launched and the Main interface (AP control panel) is

How the Function Button Works

When you finish customizing the function button, follow the steps below to
perform the scanning task by pressing the button on the scanner. The scan
will be performed in accordance with the designated button function using the
parameters configured in the Scanner Button Settings interface.
1. Load the document to be scanned into the document feed tray of the
2. Exit the Scanner Button Settings interface.
3. Press the Select button to toggle through the numbers of predefined function
4. If necessary, specify new settings for each function button. Follow the
36 FileScan 3125c User's Manual
you have to exit interface before you perform the predefined scanning task
by pressing the function button on the scanner.
activated on the screen, the scanned image files will appear in the Thumbnail
View window for your viewing after you perform the scanning task by
pressing the function button on the scanner.
scanner.
buttons (F1 to F5). When you see the number you would like to use, press
the Enter button to activate the function associated with that button easily.
procedures (steps 1 through 5) for the "Customizing the Function Buttons"
section to specify your new requirements for the buttons that you wish to
redefine.