SSV Works X32-PHZ2A Manual page 9

DASH KIT ASSEMBLY
A. Set the base plate on the dash. Press the (4) drill guides onto the base plate
B. Using a 1/8" drill bit, drill the center of the drill guides to provide
pilot holes. Limit speed and depth of the drill bit to avoid damaging
any wiring.
D. Reset the base plate, trace the outline of the baseplate circle.
A
B
C. Set aside the base plate and open the pilot holes up with a 1/4"
drill bit.
D
E. Cut out the traced circle. Limit speed and depth of cutting device
to avoid damaging any wiring.
A
C
E
9