Showven SPARKULAR WAVERFALL User Manual page 15

NOTE:
If use SHOWVEN HOST CONTROLLER ZK6200/6300 to control the firing, please press "F3" to choose "CIRCLE
FLAMER-6CH", then set the firing sequence, as for preset sequence the firing duration is fixed, so please set
firing duration 1s. Please do allocate different DMX address for each unit of SPARKULAR WAVERFALL (6
channels), otherwise it will cause signal interference.
6. Turn Off and clean up
a) Power off SPARKULAR
b) Disconnect all POWER and DMX cables.
c) Empty the remaining HC8200 in hopper, and store the remaining HC8200 in a dry sealed
bottle for next time use. Never touch the output nozzle of SPARKULAR® waverFALL when
empty the hopper. DANGER OF GET BURNT!
d) Operators can use handheld vacuum cleaner to empty the feeding hopper. Do make sure
the machine was cool down when clean it. Do NOT use high-power vacuum cleaners to
avoid hot consumables being sucked into the vacuum cleaner from the heating chamber
and cause fire.
e) Clean the surroundings to remove powder residues.
waverFALL, allow SPARKULAR
®
waverFALL to cool down.
®