Showven SPARKULAR WAVERFALL User Manual page 13

®
2. Fill SPARKULAR waverFALL
a) Open powder bags and fill the feeding hopper.
b) Choose correct consumable according to the hanging height and safety distance..
SPARKULAR waverFALL can only use HC8200 LARGE / LARGE I / LARGE II.
®
HC8200
LARGE
LARGE-Ⅰ
LARGE-Ⅱ
c) Please be noted that there may sparks or remains fall to the ground. Make sure no
flammable material on ground in the safety zone.
d) Make sure the lid of hopper is locked tight after filling.
SAFETY NOTICE: Accidentally burning of consumable HC8200 in the hopper can only use sands
to extinguish.
3. Connect Power / DMX cable
a) Connect a power cable to the POWER IN socket of SPARKULAR
other end of power cable to the power source. Make sure power supply in consistent with
the rated voltage of the equipment, and the socket must well grounded.
b) If connect machine in sequence, please connect a power link cable to the POWER OUT of
previous machine, connect the other end of the power link cable to POWER IN of the next
machine.
c) The SPARKULAR
®
version) / 3pcs (110V version). Do not connect exceed units to a single electrical circuit.
d) Power ON all SPARKULAR
Effect length (Low Output)
waverFALL power supply cable maximum allowed cascade is 6 units (220V
waverFALL.
®
Effect length (High Output)
3m
4m
5m
®
4m
5m
7m
waverFALL. Connect the