Remote Control - Pioneer VSX-521 -K Operating Instructions Manual

01 Controls and displays
01

Remote control

1
RECEIVER
SLEEP SOURCE
2
RECEIVER
INPUT SELECT
3
4
BD DVD TV
DVR/BDR CD CD-R
5
ADAPTER TUNER PORTABLE
VIDEO S.RETRIEVER SIGNAL SEL
6
AUTO/ ALC/
DIRECT STEREO STANDARD
7
AUDIO TUNER EDIT
PARAMETER TOOLS
TOP
MENU
8
ENTER
9
HOME
MENU
SETUP
RETURN
10
BASS
HDD DVD VCR
1 2 3
SB CH CH SELECT
4 5 6
11
MIDNIGHT SPEAKERS LEV
7 8 9
DIMMER LEV
0
CLR ENTER
+
10
RECEIVER
As for operating other devices, the remote control codes for the
Pioneer products are preset. The settings cannot be changed.
8
En
1
SLEEP
Press to change the amount of time before the receiver switches
into standby (30 min – 60 min – 90 min – Off). You can check the
12
remaining sleep time at any time by pressing SLEEP once.
TV
CONTROL
2
 RECEIVER
Switches the receiver between standby and on.
DTV/TV
INPUT
3
RECEIVER
13
Switches the remote to control the receiver (used to select the
white commands above the number buttons (MIDNIGHT, etc)).
CH
Also use this button to set up surround sound (page 30) or Audio
parameters (page 28).
4
INPUT SELECT
VOL
Use to select the input source (page 21).
5
Input function buttons
14
Use to select the input source to this receiver (page 21). This will
BD MENU
ADV SURR
enable you to control other Pioneer components with the remote
control.
MASTER
VOLUME
MENU
6
S.RETRIEVER
Press to restore CD quality sound to compressed audio sources
15
(page 26).
7
Listening mode buttons
AUTO/DIRECT – Switches between Auto surround mode
BAND
(page 25) and Stream Direct playback (page 26).
MUTE
16
STEREO – Press to select stereo playback (page 25).
TRE
ALC/STANDARD SURR – Press for standard decoding and to
switch between the modes of 2 Pro Logic II, 2 Pro Logic IIx,
2 Pro Logic IIz and NEO:6, and the Auto level control stereo
17 mode (page 25).
DISP
EQ
ADV SURR – Switches between the various surround modes
CH
(page 26).
PHASE
CH
Press BD first to access:
SHIFT
18
BD MENU* – Displays the disc menu of Blu-ray Discs.
8
System Setup and component control buttons
The following button controls can be accessed after you have
selected the corresponding input function button (BD, DVD, etc.).
Press RECEIVER
AUDIO PARAMETER – Use to access the Audio options
(page 28).
SETUP – Press to access the System Setup menu (page 30).
RETURN – Confirm and exit the current menu screen.
first to access:
Press BD, DVD or DVR/BDR first to access:
TOP MENU – Displays the disc 'top' menu of a Blu-ray Disc/
DVD.
HOME MENU – Displays the HOME MENU screen.
RETURN – Confirm and exit the current menu screen.
MENU – Displays the TOOLS menu of Blu-ray Disc player.
Press TUNER first to access:
TUNER EDIT – Memorizes stations for recall (page 24), also
used to change the name (page 24).
BAND – Switches between AM, FM ST (stereo) and FM MONO
radio bands (page 24).
/// (TUNE /, PRESET /), ENTER
9
Use the arrow buttons when setting up your surround sound
system (page 30). Also used to control Blu-ray Disc/DVD menus/
options.
Use TUNE / can be used to find radio frequencies and
PRESET / can be used to select preset radio stations
(page 24).
10
Component control buttons
The main buttons (, , etc.) are used to control a component
after you have selected it using the input function buttons.
The controls above these buttons can be accessed after you have
selected the corresponding input function button (BD, DVD, DVR/
BDR and CD). These buttons also function as described below.
RECEIVER
Press first to access:
BASS –/+, TRE –/+ – Use to adjust Bass or Treble.
• These controls are disabled when the listening mode is set
to DIRECT or PURE DIRECT.
• When the front speaker is set at SMALL in the Speaker
Setting (or automatically via the Auto MCACC setup) and
the Crossover Network is set above 150 Hz, the subwoofer
channel level will be adjusted by pressing BASS –/+
(page 31).
11
Number buttons and other component controls
Use the number buttons to directly select a radio frequency
(page 24) or the tracks on a CD, etc. There are other buttons that
can be accessed after RECEIVER is pressed. (For example
MIDNIGHT, etc.)
HDD*, DVD*, VCR* – These buttons switch between the hard
disk, DVD and VCR controls for HDD/DVD/VCR recorders.
SB CH – Press to select ON, AUTO or OFF the surround back
channel (page 27).