Connections - Source Audio ARTIFAKT Lo-Fi Elements User Manual

Connections

Power
To power the unit, connect a 9V DC negative-tipped power supply to the jack labeled DC
9V on the back panel. The Artifakt needs at least 200mA of current to operate as
intended. Please note that your Artifakt does not include a power supply.
Warning: Using an unregulated supply could damage the unit. A power supply with
insufficient current levels may also cause noise or other unpredictable behavior. Please be
very cautious when using 3rd-party power supplies and refer to the power supply
requirements in the Specifications section of this guide.
Guitar/Audio Connections
Using standard ¼" mono (TS) cables, connect your guitar, bass, or other instrument to the
Input 1 jack and your amp (or the next audio device in the signal chain) to the Output 1
jack. If you have a second amp or stereo effects chain, connect it to Output 2.
When the power and audio connections have been made, Artifakt is ready for use.
Source Audio Artifakt Lo-Fi Elements User Guide 4