Source Audio ARTIFAKT Lo-Fi Elements User Manual page 22

OPTION LED: The Option LED will turn red when the Glitch machine is being used. A red
LED while Glitch is enabled means that the pedal is currently "recording" / capturing
sound. By playing your instrument, you will be opening the envelope which triggers the
Glitch machine to begin capturing playback.
CONTROL LED: When turning control knobs on a Factory engine or preset, the Control
LED will flash red when you reach the knob position that is saved in that preset. This can
be helpful for remembering / learning the knob positions when making on-the-fly edits to
presets.
Blue
Preset LEDs: Preset slots #9-12 are indicated by the preset LEDs in blue. By default, these
four slots are loaded with four Factory Presets in the Modulation group, but can be
overwritten with any preset you'd like.
Purple
Preset LEDs: Preset slots #13-16 are indicated by the preset LEDs in red. By default, these
four slots are loaded with four Factory Presets in the Animation group, but can be
overwritten with any preset you'd like.
OPTION LED: The Option LED will turn purple when the OPTION/TAP switch is being
used to access an auxiliary function. For example, the CRUSH engine utilizes a purple LED
to indicate that the optional Chorus effect is enabled.
Hardware Shortcuts
Below are hardware processes that can be done using a combination of two buttons or a
button & switch.
Preset Extension Mode – ALT button + PRESET button
This will allow selection of Preset Extension Modes. Press the ALT button once to get into
ALT Mode. Once there, pressing the PRESET button will show the current extension mode
by lighting the 1-4 LEDs with the respective bank color.
You can cycle through 1-4, 1-8, 1-12, 1-16 modes and select how many preset banks you
want. Changing the Extension Mode won't actually change the preset and will revert back
to the last presets when ALT mode turns off on its own or you press the ALT button again.
Factory Reset – OPTION/TAP Switch + Power Cycle
Need to revert back to factory settings? To perform a factory reset on your Artifakt, press
& hold the OPTION/TAP footswitch while cycling power on the pedal.
Source Audio Artifakt Lo-Fi Elements User Guide 22