Source Audio ARTIFAKT Lo-Fi Elements User Manual page 17

Preset Recall
Presets can be recalled in many ways, ranging from very simple to complicated (like a full
MIDI setup). Below are descriptions of the ways Presets can be recalled.
Hardware (PRESET Select Button)
Push the PRESET Select Button to advance forward through preset slots. In Preset
Extension Mode, pushing the PRESET Select Button will automatically advance forward to
the next bank of presets. To enter Preset Extension Mode, press the ALT button + PRESET
button. You will notice the Preset LEDs illuminating to display which banks can currently
be selected. Continue pressing until only the Amber LED is lit to exit Preset Extension
Mode.
Hardware (Scroll Mode w/ Footswitches)
Press both the ON/OFF and OPTION/TAP Footswitches together for about 500
milliseconds to enter Scroll Mode. There is a 500ms hold time so that Scroll Mode is not
always activated each and every time both switches are (accidentally or otherwise)
pressed.
In Scroll Mode, use the OPTION/TAP and ON/OFF Switches respectively to advance
forward or backward through preset slots. When you've arrived at your desired preset
slot, exit Scroll Mode by tapping both footswitches simultaneously.
Neuro 3
Connect your Artifakt to your phone or desktop using the supplied USB-C cable (passive
adaptors may be needed if your device does not have a USB port). Then, load the Neuro
3 Application. If this is your first time using Neuro 3, you will be prompted to add the
Artifakt to your Pedals collection. Click on the Artifakt in the left margin. Your preset slots
will be displayed on the left side of the screen next to your Pedals collection, to the left of
the Preset Editor.
MIDI
Each preset slot's MIDI PC (Program Change) number corresponds to its slot number.
Please be aware that some MIDI controllers use a 0-127 numbering system while others
use 1-128, so you may have to offset your MIDI PC message by 1 digit, accordingly.
The Artifakt's presets can also be recalled via MIDI CC (Continuous Control).
Sending CC#083 with a CC value (or On Data 1 value) of the preset slot will recall that
preset in its bypassed state.
Sending CC#084 with a CC value (or On Data 1 value) of the preset slot will recall that
preset in its engaged state.
Source Audio Artifakt Lo-Fi Elements User Guide 17