Stereo Operation & Signal Routing - Source Audio ARTIFAKT Lo-Fi Elements User Manual

OUTPUT Control – ALT button + MIX knob
As referenced in the Controls section, tapping the ALT button then turning the MIX knob
will adjust the Output Volume of any preset. When sounds get unruly and too loud, you
can use this alternate parameter to adjust levels quickly on-the-fly.
Stereo Operation & Signal Routing
Each element in Artifakt has a discrete location in the signal path.
The Artifakt is flexible for several different use cases due to its stereo INPUT and OUTPUT
jacks. By default, the Artifakt auto-detects the cables connected to INPUTS and OUTPUTS
1 & 2 and engages the appropriate Routing Mode. Stereo Routing can also be performed
manually with the Neuro Editors, select between "Mono In, Stereo Out" or "Stereo In,
Stereo Out."
There are four routing modes available when the Artifakt is in its default Auto Detect
mode. See detailed descriptions of each Auto Detect mode in the sections below.
Mono In, Mono Out
§
Mono In, Stereo Out
§
Stereo In, Stereo Out
§
Stereo In, Mono Out
§
Source Audio Artifakt Lo-Fi Elements User Guide 23