Source Audio ARTIFAKT Lo-Fi Elements User Manual page 7

Power and Control Connections
DC 9V (Power)
Connect to a 9 Volt DC power supply. The power supply must be regulated at 9 Volts DC
(direct current), able to source at least 200 mA (milliamps) of current, and the plug should
have a tip-negative, barrel-positive polarity. Please note, Artifakt does not come stock with
a PSU, you will have to source your own power.
Note: Please use 9 Volts only. Artifakt is not meant to run on higher (e.g., 12V or 18V)
voltages.
USB-C
Connect to your computer (Windows or Mac) or mobile device (Android or iOS) to the
Artifakt's USB-C port (denoted by the icon) using a standard USB-C cable. Artifakt is a
class compliant USB device, meaning that it does not require any custom drivers.
CONTROL INPUT
The 3.5 mm CONTROL INPUT port connects to external control devices such as the Source
Audio Tap Tempo Switch and Source Audio Dual Expression Pedal. For more information,
refer to the Expression Pedal Input section of the User's Guide.
Source Audio Artifakt Lo-Fi Elements User Guide 7