Source Audio ARTIFAKT Lo-Fi Elements User Manual page 18

Saving a Preset
Using the Hardware
Press & hold the PRESET button to enter Copy Mode. You will see the Preset LED flash
rapidly. Continue holding the PRESET button to save your preset to the same location.
You can also save your preset to a different location by letting go of the PRESET button
once the Artifakt is in Copy mode (indicated by the rapidly flashing LED). Press the
PRESET button to select a different preset slot for your preset waiting in the wings. Then,
hold down the PRESET button to save it in place. You will notice the Preset LED flash twice
slowly to indicate a save.
Scroll Mode
It is possible to use Preset Scroll Mode (identified on p. 17) while copying a preset. Simply
release the PRESET button once in Copy mode (rapid LED flashing) and use the left and
right footswitches to advance backward or forward respectively through the preset slots.
MIDI
It is possible to save a preset using PC commands. First, you'll need to have made the
changes you'd like, then enter Copy Mode on your device. Then, send a MIDI PC message
to your desired preset slot destination. Then, press and hold the PRESET button to save
that preset to the new PC.
Using Neuro
To access and Save a particular preset in Neuro, click on the Artifakt in the in the Pedals
collection when the Artifakt is connected to your device via USB. Your pedal's presets will
be on the left-hand side of the screen. Hit "Save" in the upper right corner of the Preset
Editor window to save your preset. Hit "Save As" to rename before saving.
Artifakt Factory Presets
Artifakt has been loaded with 12 Factory Presets, organized in 3 banks:
Modulation, and Animation. As a reminder, preset slots #1-4 are empty for user-defined
sounds. These Factory Presets start at preset slot #5. Below is a list of each Factory Preset
and a basic description.
Source Audio Artifakt Lo-Fi Elements User Guide
Old Machines,
18