Call Transfer; Blind Transfer - Tadiran Telecom T58V User Manual

IP Phone
User Guide for T58V
on the status bar.
Note
When DND and busy forward are enabled for a specific account, incoming calls on the specific
account will be forwarded to the configured destination number. For more information on busy
forward, refer to
To disable DND in phone mode:
1. Swipe down from the top of the screen to enter the control center and then tap DND.
To disable DND in custom mode:
1. Swipe down from the top of the screen to enter the control center and then tap DND.
2. Tap the desired account.
3. Tap the Off radio box of the DND Status field.
4. Tap to accept the change.

Call Transfer

You can transfer a call to another party in one of three ways:
Blind Transfer: Transfer a call directly to another party without consulting.

Semi-Attended Transfer: Transfer a call when the target phone is ringing.

Attended Transfer: Transfer a call with prior consulting.


Blind Transfer

Before performing a blind transfer (except you use dial number method), make sure that the
transfer mode via Dsskey is configured as Blind Transfer.
To perform a blind transfer:
1. Press
2. Do one of the following:
- Enter the number you want to transfer the call to.
Press
- Enter the number you want to transfer the call to.
Tap Transfer.
90
Error! Bookmark not
Call Forward on page
or tap the Transfer soft key during a call.
to complete the transfer.
defined..