Setting Acquisition/Change Commands - Omron ZX-GT User Manual

Available Commands

Setting Acquisition/Change Commands

Command name
AVERAGE
BINLV
EDGENUM
HOLDMODE
HYS
JUDPARA
MEASMODE
PINNO
REF
TEACH
TOL
ZX-GT User's Manual
Description
Sets the number of samples to average.
Acquires the current number of samples to average.
Sets the binary level.
Acquires the current binary level.
Sets two edges whose width is to be obtained.
Acquires the setting of current specified edges 1/2.
Sets the hold conditions.
Acquires the current hold conditions.
Sets the hysteresis width.
Acquires the current hysteresis.
Sets the judgment thresholds.
Acquires the current HIGH/LOW thresholds.
Switches the current measurement mode.
Acquires the current measurement mode.
Sets the number of IC leads.
Acquires the current number of IC leads setting.
Sets the IC lead pitch/IC lead width standard values.
Acquires the current IC lead pitch/IC lead width standard
values.
Registers the all incident light state as the standard
received light intensity.
Sets the IC lead pitch/IC lead width tolerance values.
Acquires the current IC lead pitch/IC lead width tolerance
values.
Reference
p.107
p.107
p.108
p.108
p.109
p.110
p.111
p.112
p.113
p.113
p.114
p.115
p.116
p.117
p.118
p.119
p.120
p.121
p.121
p.122
p.122
105
RS-232C