Setting Acquisition/Change Commands - Omron ZFX-C10 - COMMUNICATION Command Reference Manual

Setting Acquisition/Change Commands

Acquiring/Changing the Date Setting < DATE command >
Acquiring the date setting
This command acquires the date and time of the calendar timer incorporated into the Controller.
< Command format >
or
D A T E C R
< Response format >
When processing ends successfully
O K C R
When processing fails
E R C R
< Explanation of parameters >
Year/hour/day/hour/
minute/second
Changing the Date Setting
This command changes the date and time of the calendar timer incorporated into the Controller.
< Command format >
D A T E
< Response format >
When processing ends successfully
O K C R
When processing fails
C R
E R
< Explanation of parameters >
Year/hour/day/hour/
minute/second
16
About Communication Commands
D T C R
C R
Year/hour/day/hour/minute/second
The acquired date and time are returned as numerical values of two digits each.
Example: 060301120020 → 12:00:20 on March 1st, 2006
or
C R
Year/hour/day/hour/
minute/second
Specifies the date and time.
Example: 060301120020 → 12:00:20 on March 1st, 2006
.
D T
ZFX-C Serial Communication Command Reference
C R
Year/hour/day/hour/
minute/second