Changing The Image Input Mode - Omron FQ2-S/CH Series User Manual

• FQ2-S1/S2/CH
[Image] − [Camera setup]
1
Press [ ] – [Partial input] on the right side of the display.
2
Change the input size.
3
Press [OK].
4
Press [Back].

Changing the Image Input Mode

Pixel sampling can be applied to the input image to reduce image input time.
[Image] − [Camera setup] −
Parameter
Image Input Mode
Important
If you change the image input mode, perform teaching again.
FQ2-S/CH User's Manual
− [Image input mode]
Setting
High-speed
Standard (Default)
Description
Pixel sampling can be applied to the input image to
reduce image input time.
Shortening the Measurement Takt Time
345