Differences With Cs/Cj/Cp Series - Omron WS02-SIMC1-E - V1.9 REV 02-2009 Operation Manual

Cycle Time and Time

9-2-3 Differences with CS/CJ/CP Series

Built-in Clock Function
High-speed Timer
Interrupt Time when Online
Editing
The clock of the Ladder Engine is the same as that of the computer when
startup. However, it will not synchronize with the clock of the computer be-
cause it advances according to the virtual cycle time. So if synchronization is
required, operate the CX-Simulator in the computer cycle time.
When executing a program in the computer cycle time, the High-speed Timer
and 1-ms Timer will not be guaranteed to operate correctly.
When editing online by the CX-Simulator, the cycle time will not be affected in
the virtual cycle time. However, interrupt time will occur in the computer cycle
time as well as the actual CS/CJ/CP-series PLC.
Section 9-2
199