Omron WS02-SIMC1-E - V1.9 REV 02-2009 Operation Manual page 125

Debug Console Window
[Data Replay]
Start the [Data Replay Settings] window and then Data Replay Tool using the
set file.
Replay file
•
Output file
•
Output template
•
Browse
•
FINS Address
•
Synchronous replay Replay synchronously.
•
OK
•
Cancel
•
Input the file name to be replayed by Data Replay
Tool. The Command Log file (.flg), the data trace data
file (.cdt), and the data replay file (.csv) can be re-
played.
Input the file name to output the monitor data corre-
sponding to the replay data to. The format of the
output file will be that of the data replay file(.csv).
If the data to be monitored into the output file is set to
the other data replay file, the file can be specified as
the output template file.
Select the name of the replay file, output file, and
output template file specifying the destination for
browsing.
Set the destination FINS address for the data replay.
The FINS address for the Ladder Engine is set in
default.
Start the Data Replay Tool with the present settings.
Discard the present settings and exit the window.
Section 3-9
89