Auxiliary Area (Read-Only Area) - Omron WS02-SIMC1-E - V1.9 REV 02-2009 Operation Manual

I/O Memory Allocation
Item
Special I/O Unit Cyclic
Refreshing
Units 0 to 95

9-3-2 Auxiliary Area (Read-only Area)

A000 to A447: Read-only Area, A448 to A959: Read/Write Area
Address
Words Bits
A050 to Basic I/O
A089 Unit Infor-
mation.
A099 A09914 IR/DR Op-
eration
between
Tasks
(CS1-H
CPU Units
only)
A09915 Timer/
Counter
Present
Value Re-
fresh
Method
Flag
(CS1-H
CPU Units
only)
CS/CJ-series PLC
Settings
0: Enabled These settings determine
1: Disabled whether data will be exchanged
between the specified Unit and
Default: 0 the Special I/O Unit's allocated
words (10 words/Unit) during
cyclic refreshing for Special I/O
Units.
Name
A bit will turn ON to indicate when
a fuse has blows. The bit num-
bers correspond to the fuse num-
ber on the Unit.
Turn ON this bit to share index
and data registers between all
tasks. Turn OFF this bit to use
separate index and data registers
in each task.
Indicates if the CPU Unit is using
BCD or binary (hexadecimal) for
timer/counter operation.
Function
CS/CJ-series PLC
Function
CX-Simulator
Settings
Not used.
CX-Simulator
Settings Function
1: Fuse Not used.
blown
0: Normal
1: Shared Same as
(default) CS/CJ-series
0: Inde- PLC.
pendent
1: Binary Same as
0: BCD CS/CJ-series
PLC.
Section 9-3
Function
Settings
205