Omron WS02-SIMC1-E - V1.9 REV 02-2009 Operation Manual page 161

Serial Communications Settings
9. Communications Settings of Serial Port Settings
Select Serial Port Settings from the combo boxes of Communications Set-
tings according to the purpose of debugging. The followings can be se-
lected.
Communications
Settings
−
Messages
File
Actual communica-
tions
10. Setting a COM port name
Specify a COM port to perform actual serial communications. A COM port
name (COM 1 to COM 4) can be selected in the list, and also can be input
directly for an additional COM port on the computer.
Note Communications will be disabled if the default port number allocated to the
CS1W-CIF31 Conversion Adapter is changed. Press the [Reset] button to
resume communications.
Note If the selected COM port name is already allocated to another one, a setting
error will occur.
Note If running the CX-Simulator and an application that uses a computer's COM
port simultaneously, set the COM ports so as not to overlap. For example, if
the COM port used by the CX-Programmer and that used by the CX-Simulator
overlap, communications may fail.
COM COM
port port log
name
− −
Communications are not proc-
essed.(Default)
− −
Display the contents of messages to
be sent to the Message Display
window. The process for RXD is not
executed.
Input/output from/to a file instead of a
COM port on the computer.
Possible to communicate via a COM
port on the computer.
Section 5-2
Contents
125