Omron WS02-SIMC1-E - V1.9 REV 02-2009 Operation Manual page 110

Connecting to the CX-Programmer Version 2.1 or Lower
74
3. Register the FINS address displayed in the Guide to Connect to the
CX-Programmer. Double-click the PLC name in the Project Tree of the
CX-Programmer to display the [Change PLC] window.
4. Change the [Network Type] to the network type selected by the target
Communications Unit in the [Work CX-Simulator] window. Pressing the
[Settings] button of the [Network Type] will display the [Network Settings]
window.
Section 3-8