Each Part of the Windows
3-6-2 Basic Windows Transition
Transition of System Status Setting
Window
System Status Setting
(Outline display mode)
(Detail display mode)
Messages
Alarm
The following shows the basic windows transition of the CX-Simulator. There
are two transitions: One from the [CX-Simulator Debug Console] window and
the other from the [System Status Setting] window.
Setting
PLC selection
PLC setting wizard
PLC unit registration
Network communications
setting
Network communi-
cations registration
Serial communications
setting
Serial port setting
Time-related PLC opera-
tion setting
PLC operation setting
UM setting
Transition of Debug Console Window
CX-Simulator Debug Console
Step run display
Task control
I/O break condition
I/O break condition
registration
File operation menu
Connect to Simulator
Console display setting
Data regeneration menu
PLC operation setting
I/O Condition Tool
Data Replay Tool
Command log setting
Section 3-6
startup
startup
59