Work Cx-Simulator Window - Omron WS02-SIMC1-E - V1.9 REV 02-2009 Operation Manual

Connecting to the CX-Programmer Version 2.1 or Lower

3-8-1 Work CX-Simulator Window

Names and Functions
Communications path
(Unit)
Communications path
(Unit)
Network address
Communications path
(Unit)
Node address
Communications path
(Unit)
Machine address
72
Network address
•
Node address
•
Machine address
•
Select a FinsGateway Communications Unit for
connecting the Ladder Engine of the
CX-Simulator with the CX-Programmer.
Display the FINS Address for FinsGateway
Communications Unit selected by the target
Communications Unit. Setting only Node ad-
dress is also possible.
Start the FinsGateway Communications Unit to
connect the Ladder Engine to the
CX-Programmer.
Connecting to the CX-Simulator will bring the
CX-Simulator to the following.
The FinsGateway Communications Unit is
•
started.
The routing tables for FinsGateway and the
•
Ladder Engine are overwritten.
The Serial Communications Server is started
following the Serial comm. Settings in the
[Serial Communications Settings] window.
Section 3-8
Connect to the
CX-Simulator
Disconnect the
CX-Simulator
Close
Guide to Connect
CX-Simulator
FINS address