Task Control Window - Omron WS02-SIMC1-E - V1.9 REV 02-2009 Operation Manual

Debug Console Window

3-9-8 Task Control Window

Names and Functions
Change task
display
Task type
display
Task No. display
Task settings
display
[Close] button
96
The Task Control window displays the status of the task in the program area
for application programs (UM1).
Name
Main menu
Change task display
Task type display
Task No. display
Task settings display
Task startup interval
Task status display
Task execution count Display the count for each task after the Ladder Engine
Task execution time
Monitor button
[Close] button
Select a menu.
Select the task to be displayed from the tasks regis-
tered in the program (Cycle, interrupt, or All tasks).
Display the task type (Cycle execution task or interrupt
task). If multiple interrupt types are set to a single in-
terrupt task, they will be displayed as separate lines.
Display the task No. of cycle tasks and interrupt tasks.
For the cyclic task, display "Cycle." For the interrupt
task, display its interrupt type (Power interrupt, sched-
uled interrupt, I/O interrupt, or External interrupt).
Display the time (unit: ms) for the clock interrupt task.
For a cyclic task, display the execution status (Initial,
Ready, Run, or Wait). For an interrupt task, display
"Run" if it is being executed and nothing if it is not.
is started or reset.
Display the time required to execute each task (The
latest value, Unit: ms). If an interrupt task is executed
while executing the cyclic task, the execution time for
the interrupt task is also added. If set as the computer
cycle time, the standby time for pausing with Step Run
and Scan Run is added, too.
Switch between update (monitoring) and not update
(stop monitoring) of the window.
Exit the Task Control window.
Section 3-9
Main menu
Monitor button
Task execution
Task execution
Task status
display
Task startup in-
Function
time
count
terval