Omron WS02-SIMC1-E - V1.9 REV 02-2009 Operation Manual page 15

• Functions Supported for Unit Version 2.0 or Later
CS1-H CPU Units
Function
Downloading and Uploading Individual
Tasks
Improved Read Protection Using Passwords OK
Write Protection from FINS Commands Sent
to CPU Units via Networks
Online Network Connections without I/O Ta-
bles
Communications through a Maximum of 8
Network Levels
Connecting Online to PLCs via NS-series
PTs
Setting First Slot Words
Automatic Transfers at Power ON without a
Parameter File
Automatic Detection of I/O Allocation
Method for Automatic Transfer at Power ON
Operation Start/End Times
MILH, MILR, MILC
New Applica-
tion Instruc-
=DT, <>DT, <DT, <=DT,
tions
>DT, >=DT
BCMP2
GRY
TPO
DSW, TKY, HKY, MTR,
7SEG
EXPLT, EGATR, ESATR,
ECHRD, ECHWR
Reading/Writing CPU Bus
Units with IORD/IOWR
PRV2
The following tables list the functions added for unit version 2.0 and supported
by the CX-Programmer. CX-Programmer version 4.0 or higher and
CX-Simulator version 1.4 or higher are required to use these functions.
CJ1-H CPU Units
(CJ1@-CPU@@H)
Unit version 2.0 or
later
OK
OK
OK
OK
OK
OK for up to 64
groups
OK
---
OK
OK
OK
OK
OK
OK
OK
OK
OK
---
Other unit ver-
sions
---
---
---
---
---
OK from lot number
030201
OK for up to 8
groups
---
---
---
---
---
---
OK from lot number
030201
---
---
---
OK from lot number
030418
---
xvii