Controller Configuration; Vr And Table Editors - Omron R88A-MCW151-DRT-E Operation Manual

Motion Perfect Tools
7-5-4

Controller Configuration

7-5-5

VR and Table Editors

c
o
• The Axes Button at the bottom of the window can be pressed to access a
Window to select the axes that are displayed. By default, the axes set for
the last modified start-up program from the File Menu, Jog Axes Window
or Axes Parameters Window will be displayed.
• The parameters in the bank 1 section are only read when the screen is
first displayed or the parameter is edited by the user. It is possible that if a
parameter is changed in the controller then the value displayed may be
incorrect. The refresh button will force Motion Perfect to read the whole
selection again.
The Controller Configuration Window shows the hardware and software con-
figuration of the MC Unit. The MC Unit configuration can be checked by
selecting Controller Configuration from the Controller Menu or the appropriate
button of the Control Panel.
The VR and Table Editor tools provide a spreadsheet style interface to view
and modify a range of values in memory. To modify a value, click on the exist-
ing value with the mouse and type in the new value and press return. The
Cancelling Move
Encoder Out Overspeed
Section 7-5
209