Ordering Information; Operating Modes - Omron V680 Specifications

Ordering Information

Appearance Size
65 × 65 × 65 mm
(excluding protrusions)
Ratings and Performance
Item Model
Connectable Antennas One channel (V680-HS@@)
Supply voltage 24 VDC (−15% to 10%) including 10% ripple (p-p)
Power consumption 4 W max. (Current consumption of 200 mA max. at power supply voltage of 24 VDC)
−10 to 55°C (with no icing)
Ambient operating temperature
−25 to 65°C (with no icing)
Ambient storage temperature
25% to 85% (with no condensation; ambient operating temperature is 40°C max. at humidity of 85%)
Ambient operating humidity
Insulation resistance 20 MΩ min. (at 500 VDC) between all terminals excluding the ground terminal and the case
Dielectric strength 1,000 VAC (50/60 Hz) for 1 minute between all terminals excluding the ground terminal and the case
Vibration resistance 10 to 150 Hz, 0.2-mm double amplitude at 15 m/s
Shock resistance 150 m/s
Degree of protection IEC 60529, IP20
Materials Polycarbonate (PC) resin, ABS resin
Weight Approx. 150 g
Mounting DIN Track
Note: For details, refer to the User's Manual (Cat. No. Z278).

Operating Modes

Symbol
4CH
16CH
32CH
Note 1. The V600-compatible Trigger and Auto Modes can be used with the same I/O settings and control methods that are used with the V600-HAM42-DRT.
2. For details, refer to the User's Manual (Cat. No. Z278).
Commands (4-byte, 26-byte, 58-byte Access Mode)
Reading READ
WRITE
BIT SET
Writing
BIT CLEAR
DATA FILL
Transmission Distance Specifications
Amplifier
ID Tag
Antenna
V680-D1KP52MT
V680-D1KP52MT
(embedded in metallic surface: steel) Write: 0.5 to 3.0 mm (axial deviation ±2) Write: 0.5 to 4.0 mm (axial deviation ±2)
1-Kbyte
V680-D1KP66T
memory
V680-D1KP66MT
(flush-mounted on metallic surface: steel)
V680-D1KP66T-SP
V680-D2KF52M
V680-D2KF52M
(embedded in metallic surface: steel)
2-Kbyte
memory
V680-D2KF67
V680-D2KF67M
(flush-mounted on metallic surface: steel)
V680-D8KF68/-D32KF68
V680-D8KF68/-D32KF68
8-/32-Kbyte
memory (Special attachment provided;
flush-mounted on metallic surface: steel)
This document provides information mainly for selecting suitable models. Please read the User's Manual (Cat. No. Z278) carefully for information that the
user must understand and accept before purchase, including information on warranty, limitations of liability, and precautions.
OMRON Corporation
Industrial Automation Company
Sensing Devices Division H.Q.
Industrial Sensors Division
Shiokoji Horikawa, Shimogyo-ku,
Kyoto, 600-8530 Japan
Tel: (81)75-344-7022/Fax: (81)75-344-7107
Regional Headquarters
OMRON EUROPE B.V.
Sensor Business Unit
Carl-Benz-Str. 4, D-71154 Nufringen,
Germany
Tel: (49) 7032-811-0/Fax: (49) 7032-811-199
OMRON Industrial Automation Global: www.ia.omron.com
Model
V680-HAM42-DRT
V680-HAM42-DRT
2
in X, Y, and Z directions 3 times each (18 times in total)
Description Maximum number of bytes accessible in ID Tag
4-byte Access Mode Read: 4 bytes/Write: 4 bytes
26-byte Access Mode Read: 26 bytes/Write: 26 bytes
58-byte Access Mode Read: 58 bytes/Write: 58 bytes
Data in the ID Tag memory is read by specifying the memory address and the number of bytes to process. (The number of bytes can be specified using the Access Mode.)
Data is written to the ID Tag by specifying the memory address, number of bytes to process, and the data. (The number of bytes can be specified using the Access Mode.)
Previously specified bits (i.e., bits that are turned ON) are turned ON in the ID Tag address specified for BIT SET.
Previously specified bits (i.e., bits that are turned ON) are turned OFF in the ID Tag address specified for BIT CLEAR.
The specified continuous memory addresses in the ID Tag are filled with the same data.
V680-HS51
Read: 0.5 to 6.5 mm (axial deviation ±2) Read: 0.5 to 9.0 mm (axial deviation ±2)
Write: 0.5 to 6.0 mm (axial deviation ±2) Write: 0.5 to 8.5 mm (axial deviation ±2)
Read: 0.5 to 3.5 mm (axial deviation ±2) Read: 0.5 to 4.5 mm (axial deviation ±2)
---
---
---
Read/Write: 0.5 to 5.5 mm (axial deviation ±2) Read/Write: 0.5 to 8.0 mm (axial deviation ±2) Read/Write: 0.5 to 9.5 mm (axial deviation ±10)
Read/Write: 0.5 to 3.5 mm (axial deviation ±2) Read/Write: 0.5 to 3.0 mm (axial deviation ±2)
---
---
OMRON ELECTRONICS LLC
One Commerce Drive Schaumburg,
IL 60173-5302 U.S.A.
Tel: (1) 847-843-7900/Fax: (1) 847-843-7787
OMRON ASIA PACIFIC PTE. LTD.
No. 438A Alexandra Road # 05-05/08 (Lobby 2),
Alexandra Technopark, Singapore 119967
Tel: (65) 6835-3011/Fax: (65) 6835-2711
OMRON (CHINA) CO., LTD.
Room 2211, Bank of China Tower,
200 Yin Cheng Zhong Road,
PuDong New Area, Shanghai, 200120, China
Tel: (86) 21-5037-2222/Fax: (86) 21-5037-2200
Note: For applicable V680 Antennas and ID Tags and for more information on the
V680-HAM42-DRT, refer to the Datasheet (Cat. No.: Q160) and the User's
Manual (Cat. No.: Z278).
2
acceleration with 10 sweeps in X, Y and Z directions for 8 minutes each
IN: 4 words OUT: 4 words (PLC inputs: 64 points, PLC outputs: 64 points)
IN: 16 words OUT: 16 words (PLC inputs: 256 points, PLC outputs: 256 points)
IN: 32 words OUT: 32 words (PLC inputs: 512 points, PLC outputs: 512 points)
V680-HAM42-DRT
V680-HS52
Read: 0.5 to 12.0 mm (axial deviation ±2)
Write: 0.5 to 9.5 mm (axial deviation ±2)
Read: 5.0 to 30.0 mm (axial deviation ±10) Read: 5.0 to 47.0 mm (axial deviation ±10)
Read/Write: 1.0 to 17.0 mm (axial deviation ±2)
Write: 5.0 to 25.0 mm (axial deviation ±10) Write: 5.0 to 42.0 mm (axial deviation ±10)
Read: 1.0 to 16.0 mm (axial deviation ±2) Read: 5.0 to 25.0 mm (axial deviation ±10) Read: 5.0 to 25.0 mm (axial deviation ±10)
Write: 1.0 to 14.0 mm (axial deviation ±2) Write: 5.0 to 20.0 mm (axial deviation ±10) Write: 5.0 to 20.0 mm (axial deviation ±10)
Read: 5.0 to 25.0 mm (axial deviation ±10) Read: 5.0 to 42.0 mm (axial deviation ±10)
Read/Write: 1.0 to 15.0 mm (axial deviation ±2)
Write: 5.0 to 20.0 mm (axial deviation ±10) Write: 5.0 to 37.0 mm (axial deviation ±10)
Read/Write: 1.0 to 17.0 mm (axial deviation ±2) Read/Write: 7.0 to 30.0 mm (axial deviation ±10) Read/Write: 5.0 to 42.0 mm (axial deviation ±10)
Read/Write: 1.0 to 16.0 mm (axial deviation ±2) Read/Write: 6.0 to 25.0 mm (axial deviation ±10) Read/Write: 5.0 to 25.0 mm (axial deviation ±10)
Read/Write: 5.0 to 45.0 mm (axial deviation ±10) Read/Write: 5.0 to 75.0 mm (axial deviation ±10)
---
Read/Write: 5.0 to 35.0 mm (axial deviation ±10) Read/Write: 5.0 to 55.0 mm (axial deviation ±10)
Authorized Distributor:
In the interest of product improvement,
specifications are subject to change without notice.
Cat. No. Q161-E1-01
Words allocated in Master Unit
V680-HS63 V680-HS65
---
---
---
---
Printed in Japan
0308-0.3C (0308) (C)
(Unit: mm)