Omron 3G3AX-MX2-PRT-E User Manual page 23

Step-by-Step Basic Installation
Step 5
Step 6
Step 7
Step 8
Push the Option Board into the previ-
ous location of the option board cover
until it clicks into place
Press down on the indicated corner
of the Option Board housing to
ensure proper connection of the
Option Board connector
Check that there is
no gap between the
top edges of the
Option Board and the
Inverter casing.
Secure the Option Board in place
with the mounting screw (do not over-
tighten).
Section 2-3
9