Advantage Controls MegaTronMT Installation Maintenance Repair Manual page 26

5.1 Password
5.2 Date and Time Set Up
5.3 Relays
Additional relay logic is available with up to 3 additional Activators and up to 4 Disablers allowing multiple
functions to activate the same relay and multiple functions to prevent the relay from coming on. There is
also a Daily Max amount of time that a relay can be on. If a relay is on for the max amount, it does not let
the relay come on anymore that day (a 24-hour clock is used for the day with midnight being the start of the
day). The Delay setting is the amount of time a control function must come on before the relay will react
and activate. This is to prevent a relay from chattering on/off if a reading is bouncing around the set point
or alarm.
ADMIN PASSWORD - The administrator password
gives access to all menus except factory set up.
USER PASSWORD - The user password allows the
user to access HOME menus that are made available
in USER SET UP.
DATE AND TIME - For setting the date, time, day, and
week on the controller.
CONFIGURE RELAYS - This menu lets you choose a
Main Action or function (timer 1, conductivity, alarms
etc...) to activate a relay.
A pop-up screen appears with a list of all available
activation functions to arrow through.
26