Tecnosystemi Apply.co pico basic 30 User Manual page 75

• Settings Menu
This menu allows the configuration and setting of certain functions of the device.
To access the settings menu press
FUNCTION
Renaming
PIN change
Check FW
FW update
Cascade mode
LED SHUTDOWN
Delete device
Vr.
DESCRIPTION
This function allows to edit the name of the device
This function DOES NOT allow to change the PIN. However, to carry out
this procedure you will need to re-configure your device.
This function allows to check the FW version of your device and any
available updates.
To update the control unit to the latest available FIRMWARE, go to the
FIRMWARE UPDATE menu and start the procedure.
Follow the instructions provided by the App and finish the procedure.
This function allows to manage the configuration of SLAVE devices with
respect to the MASTER device.
The function is only visible if the PICO MASTER has one or
more paired SLAVE devices.
Compared to MASTER devices, cascade devices can be configured as
SYNCHRONOUS or ASYNCHRONOUS.
SYNCHRONOUS: All SLAVE devices follow the ventilation direction of
the MASTER device.
ASYNCHRONOUS: SLAVE devices have the ventilation flow reversed
with respect to the MASTER device (Example: MASTER = introduction,
SLAVE = removal).
From this menu you can delete or change the settings of the SLAVE
devices.
From the factory the LED indications of the device are always active and
correspond to the mode colours (example: removal = green).
To enable the function, go to the LED SHUTDOWN menu and select one
of always off or timed options.
The LED will turn on momentarily for 3 s if you change the operating
mode.
WARNING: switching off the LED does not prevent the device
from signalling filter maintenance.
This function allows to delete the device from the application.
Indicates the version of the application.
75