Tecnosystemi Apply.co pico basic 30 User Manual page 64

For PICO BASIC models
Configuration mode is enabled within 2 minutes of the first power supply.
The BLUE LED blinks in this stage.
Should the configuration not be successful within 2 minutes, disconnect the power supply,
wait 5 s, and reconnect the device.
a. Press PROCEED.
For PICO PRO and PICO PRO+ models
b. Turn on the device.
c. Move the remote control closer to the device and press the NIGHT and MINIMUM SPEED
keys at the same time for at least 3 s. The BLUE LED on the device blinks.
d. Press PROCEED.
6. Check for the correct connection with the device, by checking the status of the LED.
7. Press CHECK LED.
8. If the connection is successful, the green LED lights up.
9. Enter the name of the installed device.
10. Enter a 4-digit security code (example: 1234).
OFFLINE MODE
a. Wait for configuration to complete.
b. Press END.
64