Transportation, Handling And Storage; Reception And Inspection; Storage; Handling And Unpackaging - Tecnosystemi Apply.co pico basic 30 User Manual

4. Transportation, handling and storage

4.1 Receipt and inspection
The product is supplied factory packaged and in perfect condition. Upon receipt of the product,
verify whether it is intact: any damage must be promptly reported to the carrier by noting it on the
transportation document and promptly notifying the supplier.

4.2 Storage

Store the packaged product in its packaging in a closed and dry place, away from atmospheric
agents.

4.3 Handling and unpackaging

It is recommended to leave the product packaged during handling and to remove the packaging only
when installing. The unit's packaging must be removed carefully to avoid damaging the machine.
The materials that compose the packaging can be of a mixed nature (wood, cardboard, nylon, etc.).
It is recommended that the protection film of the panels (if any) be removed after installation of the
product.
ATTENTION
Do not leave parts of the packaging within the reach of children or persons with
disabilities.
Packaging materials shall be kept separately and delivered to the companies
designated for recovery and recycling, therefore reducing environmental impact.
55