Table of Contents
Advertisement
3
MEMORY OPERATION
General description
The Memory mode enables you to quickly select
often-used frequencies, modes, and other parameters�
While operating in the Memory mode, you can
temporarily change the operating frequency, mode,
and so on without overwriting the memory channel
contents�
Memory
Group
channel
Regular memory channels�
Up to 2000 channels can be
00 to 99
00 to 99
separately stored in the 100
memory channel groups�
DMemory channel content
The following information can be entered into the
Memory channels:
• Name
• Operating frequency
• Tuning step
• Operating mode
• Duplex direction (DUP+/DUP–)
• Frequency offset
• Scan skip setting
• AF filter
• Favorite
• Subaudible tone encoder, tone squelch, or DTCS squelch
ON/OFF*
• Subaudible tone frequency, tone squelch frequency, or
DTCS code with polarity*
• VSC*
* For only FM/FM-N�
NOTE: Memory content may be accidentally
cleared by static electricity, electric transients,
and other causes� In addition, it may be cleared
by a malfunction or during repairs� Therefore, we
recommend that you backup the Memory content or
save it onto a microSD card* or a PC�
*User supplied
L The CS-R15 programming software can also be
used to backup your memory content� See its instruction
manual for details�
Descriptions
MEMORY screen
On the MEMORY screen, you can easily manage the
Memory channel content�
DTree view of the MEMORY screen
(Example)
MEMORY
Memory CH
FM Radio Memory *
*
1
Automatically writes when a signal is received�
*
2
Skips the set frequency during a scan�
While a VFO scan is paused and if you want to
skip the frequency, push [SKIP] and select "Add to
SKIP MR Group" to set the frequency as the Skip
channel�
*
3
See page 3-15 for details�
3-2
Group 00
(No Category)
Airband
Marine VHF
Group 99
Auto MW CH *
1
SKIP CH *
2
<<Add Category>>
3
A: Area 1
B: Area 2
Z:
(Blank)
00
99
000
199
00
99
00
99
Advertisement
Chapters
Table of Contents
