Dskip Select Mode Setting - Icom IC-R15 Advanced Manual

5
FM RADIO OPERATION
Basic operation

DSKIP Select mode setting

You can set memories as skip channels� The selected
memories are not displayed in the Memory mode�
In the SKIP Select mode, you can select memory
channels set as skip channels by rotating [DIAL],
making it easy to set and cancel SKIP�
1� Push [MR] to select the Memory mode�
• " " and the selected memory channel number is
displayed�
2� Push [QUICK]�
3� Select "SKIP Select Mode�"
• "DIAL Operation: Displays SKIP CH" is displayed and
then " " blinks�
4� Rotate [DIAL] to select a channel�
5� Push [SKIP] to set the Skip Channel�
• "SKIP" is displayed when a Skip channel is set�
L To cancel the skip setting, push [SKIP] again�
L If you want to set other channels, repeat steps 4 and
5�
6� Push [CLEAR] to exit the SKIP Select mode�
• " " is displayed�
Blinks
TIP: On the standby screen, push [QUICK], and
selecting "SKIP" also sets the skip setting�
5-5