Icom IC-R15 Advanced Manual page 5

INTRODUCTION
HOW TO ENTER TEXT
Example: Entering "2m Call" as a Memory name of
channel 00 in group 06 (No Category).
[MENU] > MEMORY > Memory CH
1. Push [MENU].
2. Select "MEMORY" on the MENU screen.
3. Select "Memory CH."
4. Select "(No Category)."
5. Select a channel group where the memory
channel you want to edit is listed.
6. Select a Memory channel.
7. Push [QUICK].
8. Select "Edit."
• The Edit screen is displayed.
9. Select "NAME."
10. Push [QUICK].
11. Select the character type.
L To enter symbols, select "!"#."
12. Rotate [DIAL] to select a character, then push [ENT].
L Information
• To move the cursor forward, push D-pad().
• To move the cursor backward, push D-pad().
• To insert a character, move the cursor to a place to
enter, then rotate [DIAL].
• To clear a character, push [CLEAR].
• To consecutively clear characters, continuously hold
down [CLEAR].
• When the character type is "ABC" or "abc," and while
entering a character, push [QUICK] to select upper
case or lower case letters.
13. Repeat steps 10 ~ 12 to enter a name, and then
push [ENT].
• Returns to the Edit screen and the entered name is
displayed.
14. Select "<<Overwrite>>."
• A confirmation dialog is displayed.
15. Select "YES."
• The Memory name is overwritten.
iv