Scan Skip Settings; Dstoring The Skip Frequencies; Dsetting The Skip Channel - Icom IC-R15 Advanced Manual

4
SCAN OPERATION

Scan skip settings

DStoring the skip frequencies

You can skip unnecessary frequencies during a scan�
While a scan is paused, and if you want to skip the
frequency, you can store it into the Skip channels
group (SKIP CH: 00 ~ 99) as a Skip channel (PSKIP)�
The Scan Skip function speeds up a scan�
1� While a VFO scan is paused, push [SKIP]�
2� Select "Add to SKIP MR Group�"
• The window, as shown above, is displayed�
• Two short beeps sound�
• The frequency is stored in the Skip channels group�
• After storing, the scan resumes�
L If there is no blank channel, an error beep sounds,
and the frequency is not stored�

DSetting the skip channel

You can set or clear a Skip Channel setting�
The channels that are set as a Skip channel are
skipped during a scan�
1� Push [MR] to enter the Memory mode�
L For only the USA version, pushing [MR] each time
selects the Memory and Weather Channel modes�
2� Select the memory channel to be skipped�
3� Push [QUICK]�
4� Select "SKIP�"
5� Select an option�
• OFF: Cancels the Skip Channel setting�
• SKIP: Skipped during a Memory scan�
• PSKIP: Skipped during both VFO and Memory
scans�
4-8
When a Skip channel is
set, "SKIP" or "PSKIP" is
displayed�