Sounds - Icom IC-R15 Advanced Manual

7
SET MODE

Sounds

Volume Select
[MENU] > SET > Sounds > Volume Select
Select whether or not to adjust the audio output level
independently, according to the operating status�
• All: The audio output level of the FM Radio,
A band (VFO A), and B band (VFO B) are
adjusted at the same time�
• FM Radio Separate:
The audio output level of the FM Radio is
independently adjusted� The audio output
level for A band (VFO A) and B band
(VFO B) are adjusted at the same time�
• Separate: The audio output level for the FM Radio,
A band (VFO A), and B band (VFO B) are
independently adjusted�
Earphone Mode
[MENU] > SET > Sounds > Earphone Mode
Turns the earphone mode ON or OFF�
While in the earphone mode, the audio volume level is
automatically adjusted to a comfortable level when the
optional earphone is connected to the [ ] jack�
Beep Level
[MENU] > SET > Sounds > Beep Level
Sets the beep output level to 0 (OFF) or 1 (minimum)
~ 15 (maximum)�
Beep/Vol Level Link
[MENU] > SET > Sounds > Beep/Vol Level Link
Selects whether or not the beep output level can be
adjusted by rotating [VOL]�
• OFF: The output level is fixed to the level set in
"Beep Level�"
• ON: The output level can be adjusted by rotating
[VOL]�
Key-Touch Beep
[MENU] > SET > Sounds > Key-Touch Beep
Turns the confirmation beep ON or OFF�
• OFF: No beep sounds�
• ON: A beep sounds when you push a key�
Scan Stop Beep
(Default: All)
[MENU] > SET > Sounds > Scan Stop Beep
Turns the Scan Stop Beep ON or OFF�
• OFF: No beep sounds�
• ON: A beep sounds when a scan stops by
Sub Band Mute
[MENU] > SET > Sounds > Sub Band Mute
Selects whether or not to mute the SUB band audio
signal while receiving on the MAIN band and/or sound
a beep when a signal disappears on the SUB band�
• OFF:
• Mute:
• Beep:
(Default: OFF)
• Mute & Beep: The SUB band audio signal is muted
L When you set this item to "Beep" or "Mute & Beep," a
(Default: 8)
(Default: OFF)
(Default: ON)
7-12
receiving a signal�
Turns OFF the function�
While receiving on the MAIN band,
the SUB band audio signal is muted�
A beep sounds when a signal
disappears on the SUB band�
while receiving on the MAIN band�
When a signal disappears on the
SUB band, a beep sounds�
beep sounds, even if no signal is received on the MAIN
band�
(Default: OFF)
(Default: OFF)