Charging Information; Dcharging With A Usb Cable - Icom IC-R15 Advanced Manual

1
BATTERY CHARGING

Charging information

NOTE:
• Before using the receiver for the first time, the battery pack must be fully charged for optimum life and
operation�
• BE SURE to turn OFF the receiver while charging. Otherwise, the attached battery pack cannot be charged.
L While charging, the charging icon "
L The icon and "Charging����" disappear when the battery pack is fully charged�

DCharging with a USB cable

You can charge the battery pack with a USB cable (Type-C) while operating the receiver�
NOTE:
• BE SURE to attach the battery pack to the receiver�
• USB Power Delivery (USB PD) is not supported�
• You may not be able to charge:
- Depending on your USB cable or power adapter�
- When using a USB hub or connecting to a low output
USB port�
• Charging time may differ, depending on the USB port.
• The S-meter may appear, or the noise may occur, due
to the influence of the USB power supply's noise�
In that case, unplug the USB cable to disconnect the
receiver from the USB power supply�
" and "Charging����" are displayed�
USB cable
To the [USB] port To a USB port
TIP:
• When a USB cable is connected, the charging is
stopped when the battery is fully charged�
After that, the charging will resume when a certain
amount of capacity is consumed while connecting the
USB cable�
• You can change the operation when the receiver is
connected to a PC through a USB cable�
([MENU] > SET > Function > USB Connect)
1-3
Power adapter
or external battery
(BC-258 ac adapter,
or user supplied)
PC,
Mobile device