Dascom DC-8600 User Manual page 44

Dascom DC-8600
(3)
①
To load a new ribbon onto cartridge,
place or engage orange spoolof ribbon to
feeding hub of the cartridge.
②
While unwinding the ribbon film,
route the film around three guiding
poles.
③
Finally engage the black spool to the
winding hub of cartridge.
Apply some force to push in the spools to the hubs.
The ribbon should be slightly tightened and not slanted.
(4)As shown in the right diagram, push in the
ribbon cartridge to the far end until a "click" is
heard to indicate correct insertion.
31
User Guide V1.0