Network Settings; Ethernet Connection; Network Mode - Fanvil i66 User Manual

13 Network Settings

13.1.1

Ethernet Connection

Users can configure the Ethernet network settings through the device webpage and
device menu. The device defaults to using IPv4 mode, and users can refer to the network
mode to modify the network settings.
Setting up Ethernet Network via Web Interface:
Users can access the webpage [Network] >> [Basic] >> [Network Setting] to configure
the network type. It supports setting up a static IP and DHCP.
Setting up Ethernet Network via Device Menu:
Users can configure the network type through the device menu [Network], supporting
both static IP and DHCP settings.
Setting Static IP:

When the network is set to a static IP, you manually configure the device's IP address.
IP Address: Enter the desired IP address.

Subnet Mask: Enter the subnet mask.

Gateway: For network interconnection, fill in according to your requirements.

Primary DNS: IP address of the main DNS server.

Secondary DNS: IP address of the backup DNS server.


13.2 Network Mode

The device supports three network modes: IPv4, IPv6, and IPv4&IPv6. Users can
configure the Ethernet network mode through both the device webpage and device menu.
Each network mode allows for the configuration of network type, using either static IP or
DHCP.
Setting up Ethernet Network Mode via Web Interface:
Users can access the webpage [Network] >> [Basic] >> [Network Mode] to configure
the network mode. It supports setting IPv4, IPv6, or IPv4&IPv6.
Setting up Ethernet Network Mode via Device Menu:
Users can configure the network mode through the device menu [Network] >> [Ethernet],
supporting IPv4, IPv6, or IPv4&IPv6 settings.
55