Advertisement
Advertisement
Related Manuals for Fanvil i30
Summary of Contents for Fanvil i30
- Page 1 WWW.FANVIL.COM SIP Video Door Phone Quick Installation Guide...
-
Page 2: Table Of Contents
Table of Contents 1. Package Contents ................4 2. Physical Specifications ............... 4 3. Installation ..................8 4. Searching Door Phone ..............11 5. SIP Door Phone Setting ..............12 6. Door Unlocking Setting ..............14... -
Page 3: Package Contents
1. Package Contents Connectors Door Phone Quick Installation Guide Screw and RFID Cards Wrench 2. Physical Specifications Device size 160 x 93 x 35 mm Weight 330g 1) Front Panel Camera RFID Reader Lock Call & Ring Numeric Keyboard Network/SIP Registration DSS Key Speaker... - Page 4 Registration Steady blue SIP Registration succeeded 2) Port Definition After removing the Back Panel of i30, there are one terminal block connectors for power and lock control connection as shown in the picture below. Network port Power and lock JP1 Jumper...
- Page 5 Passive Mode: When the electric-lock starting current is more than 12V/700mA, i30 needs to use the external drive mode, the electric lock interface with short circuit output control. Active Mode : When the electric-lock starting current is less than 12V/700mA, i30 can use the internal drive mode, the electric lock interface with 12V DC output.
- Page 6 Wiring instructions NO: Normally open contact COM: Relay contact NC: Normally closed contact Driving Mode Electric-lock Mode Connections No electricity Electrify Jumper Active Passive when open when open √ √ √ √ √ √ √ √ √ √...
-
Page 7: Installation
3. Installation Main Part of Intercom Back Panel Wall-mounted Shell Figure 1 Three Major Parts of i30 Step 1: Installation preparation Check the following contents: Hex wrench x 1 RJ45 plugs x 2 (1 spare) KA4 x 25mm screws x 4 ... - Page 8 Figure 3 Figure 4 B. With Phillips screwdriver, unpack the back panel and the main part of intercom as shown in Figure 5. Figure 5 Step 4: Hanging shell fixing and cabling Figure 6 A. Select the hole for cable supply; cable length of 15cm to 20cm is recommended. B.
- Page 9 Figure 7 Figure 8 A. Select the hole for cable supply. B. Connect the cables of RJ45, power, and electric-lock to the motherboard socket as mentioned in connectors description (refer to Section 2). C. Test whether there is electricity by doing the following: Press the # button for 3 seconds to get the IP address of intercom by voice.
-
Page 10: Searching Door Phone
There are two methods as shown below to search the i30. Method 1: Open the iDoorPhone Network Scanner. Press the Refresh button to search the i30 and find the IP address. Method 2: Press and hold the “#” key for 3 seconds and the door phone will report the IP address by voice. -
Page 11: Sip Door Phone Setting
5. SIP Door Phone Setting Step 1: Login the homepage of the i30. Step 2: Add the SIP account. Set SIP server address, port, user name, password and SIP user with assigned SIP account parameters. Select “Activate”, and then click Apply to save this setting. - Page 12 Step 3: Setting DSS key Set the DSS key as shown below for speed dialing. Click “Apply” to save this setting. Type: Hot Key Number 1: The DSS key will dial to this Number 1. Number 2: If Number 1 is unavailable, it will be forwarded to Number 2. Line: Working line Subtype: Speed dial Step 4: Door Phone Setting...
-
Page 13: Door Unlocking Setting
6. Door Unlocking Setting Local 1) Local Password Step 1: Go to Advanced Settings → set Local Password (The default is “6789”). Step 2: Use the device’s Numeric Keyboard to input password and “#” key, and then the door will be unlocked. 2) Private Access Code Step 1: Go to EGS ACCESS →... - Page 14 Remote Remote Password Step 1: Go to Advanced Settings → Set Remote Password (The default is “*”). Step 2: To answer the call made by visitor via SIP phone, press the “*” key to unlock the door for the visitor. RFID Card Step 1: Go to EGS Cards→enter the ID of RFID card (Only front 10 digits→press Add button to add it to Door Card Table.