Advertisement
4
Searching device
There as shown below to search the device.
Methods 1:
Download address:
http://download.fanvil.com/tool/iDoorPhoneNetworkScanner.exe
Open the iDoorPhone Network Scanner. Press the Refresh button to search the device and
find the IP address.
Method 2:
Long press DSS key for 3 seconds(after power-on for 30 seconds), and when the speaker beeps
rapidly, press DSS key again quickly, the beeps stop ,the intercom will report the IP address by itself.
Method 3:
In addition, device provides the device surface DSS key operation to switch IP address acquisition mode:
In the standby mode, long-press the DSS key for 3 seconds and the beep will last for 5 seconds.
Within 5 seconds, press the DSS key three times quickly to switch to the network mode.
a. If it is in the mode of DHCP and doesn't receive the IP address, switch it to the mode of
static IP (192.168.1.128), broadcast the IP address after the successful switch.
b. If it is in the mode of static IP address (192.168.1.128), switch it to the DHCP mode, broadcast
the IP address after the successful switch.
c. If it is in the mode of DHCP and obtain the IP address, the mode will not be switched and directly
broadcast the IP.
Default DHCP Client
Voice broadcast
IP address
5
Fast settings
Step 1:Log in to the device page
Use the web browser input IP (for example: http://192.168.1.128) access.
The default user and password are admin.
i16S-02P
Default Setting
Enabled by default
Hold the DSS key for 3 seconds,
then press the DSS key again.
i16S-02P
Static IP address
Default Web port
3
192.168.1.128
80
Advertisement
