Table of Contents
Advertisement
Available languages
Available languages
6. In the software, select the Topography menu in the lower
menu bar.
7. Scan the sand with the 3D camera; select the Scan button.
8. The sand can be remodelled at any time and then scanned
in again. If the sand is changed but not rescanned, this will
not be automatically detected in the software.
4.5
After use
1. Switch off the projector.
2. Switch off the tablet computer and charge it if necessary.
3. Remove the 3D camera from the projector mount.
4. Remove the projector mount together with the projector
from the sandbox.
5. Remove the projector from the projector mount.
6. Remove the sand from the sandbox.
7. Sweep out and clean the sandbox.
8. Push the lids of the sandbox shut.
5
Troubleshooting
Error
Cause
Projector cannot be
Power supply not
switched on
connected
Projector does not
HDMI cable not
show ahy image
connected
Projector not set
correctly in the
settings
No image from the
Connecting cable
3D camera
not plugged in
Image from 3D
Camera mounted
camera is upside
upside down
down
6
Maintenance
6.1
Maintenance intervals
Monthly or as needed
Clean dust and dirt from the surface with a cloth.
Check that all screwed connections are secure and tighten
if necessary.
7
Observe the temperature range (see chapter 10). Protect the
product against direct sunlight.
Switch off the product completely during transport or storage.
Remove the sand and store the components in the original
packaging provided.
8
Disposing of the product generates different types of waste. A
distinction must be made between hazardous and non-
hazardous waste that must be disposed of in accordance with
local applicable regulations and guidelines.
8.1
8.2
9
The name plate is located on the product (sample illustration).
Remedy
Connect power
supply
Connect HDMI
cable to the tablet
computer
Set the projector as
an advanced
display.
Plug in connecting
cable
Rotate the camera
10
Weight of Wildlife-Fire Sandbox
(completely filled with 25 kg of sand)
Weight of empty sandbox
Dimensions of sandbox (W x D)
Temperature range
Transport and storage
Disposal
Disposal of electrical and electronic
equipment
Electric and electronic equipment are subject to
national and international waste disposal regulations
and must not be disposed of as residential waste. This
is indicated by the adjacent symbol. Dräger accepts
returns of electrical and electronic devices. For
information please contact the national marketing
organizations or Dräger.
Disposal of batteries and rechargeable
batteries
Batteries and rechargeable batteries must not be
disposed of as household waste. This is indicated by
the adjacent symbol. Dispose of batteries and
rechargeable batteries at battery collection points in
compliance with the applicable regulations.
Name plate
Technical data
Troubleshooting
en
approx. 52 kg
20 kg
625 x 945,7 mm
+5 to +35 °C
19
Advertisement
Chapters
Table of Contents
