Basics; Starting The Program; Structure Of A Screen - Dräger WFS 1000 Instructions For Use Manual

4. Mount the projector to the support arm and secure it with
the two hexagon socket screws.
5. Mount the 3D camera to the projector stand using the
gooseneck bracket and make sure that the gooseneck
bracket does not obstruct the image of the projector.
6. Guide the 3 cables for the
- projector power supply
- HDMI cable from the projector to the tablet computer
- USB cable from the 3D camera to the tablet computer
through the support arm and connect them to the projector
and the 3D camera.
7. Attach the projector stand to the mount on the sandbox and
secure it with the two screws.
8. Connect the HDMI cable and the USB cable to the USB
hub.
9. Connect the USB hub to the tablet computer.
10. Connect the cable for the projector power supply.
NOTE
Lay the cables so that there is no risk of tripping, or secure
and mark the cables accordingly.
4.2

Basics

4.2.1

Starting the program

Start the program by double-clicking on the
desktop.
4.2.2

Structure of a screen

1 Menu bar
2 Currently selected menu
3 Button (hide controls, end program)
4 Program overview
5 Lower menu bar
6 Language selection
Use en
icon on the
15