Table of Contents
Advertisement
Cleaning and care
Cleaning the side runners
The side runners can be removed to-
gether with the FlexiClip runners (if in-
serted).
If you want to remove the FlexiClip run-
ners separately beforehand, please fol-
low the instructions in "Fitting and re-
moving FlexiClip runners" in the "Guide
to the appliance" chapter.
The surfaces of the HFC 71 FlexiClip
runners have been treated with
PerfectClean.
Please see "PerfectClean" in "Clean-
ing and care" for instructions on
cleaning.
Risk of injury caused by hot sur-
faces.
The combination steam oven gets
hot during operation. You could burn
yourself on the heater elements,
oven compartment or accessories.
Allow the heater elements, oven
compartment and accessories to
cool before removing the side run-
ners.
156
Pull the side runners out of holder (1.)
from the front and remove them (2.).
Remove:
- Light soiling with a clean sponge and
a solution of washing-up liquid and
hot water
- Stubborn soiling with a clean dish-
washing sponge, hot water and a
little washing-up liquid If necessary,
you can also use the rough side of
the sponge.
After cleaning, wipe the surface with
clean water to remove any cleaning
agent residues.
Then dry the side runners with a
cloth.
Reassemble by following these in-
structions in reverse order.
Refit the side runners carefully.
If the side runners are not correctly
inserted, there is no anti-tip protec-
tion. The temperature sensor could
also be damaged when cooking con-
tainers are placed in the steam oven.
Advertisement
Table of Contents
