Table of Contents
Advertisement
Operating Instructions Dräger FG4500
12.6 Input of combustion system data
Input of combustion system data during exhaust gas measurement can be switched on or
off. These include boiler temperature, soot numbers and the consideration of oil derivatives.
12.7 Draft measurement
Soll die Zugmessung bei der Abgasanalyse berücksichtigt werden, kann diese hiermit ein-
oder ausgeschaltet werden.
12.8 Calorific value
Enabling takes account of negative qA and ETA values in the measurement. This function
should be always active for calorific value systems, so that measurement results are valid.
12.9 Extended fuel table
The fuel table, which includes light fuel oil, natural gas, LPG propane, heavy fuel oil and
pellets is extended by the following fuels:
wood, brown coal, hard coal, coal briquettes, coal coke, anthracite, biogas, LPG bu-
tane, coal gas, coke oven gas.
12.10 Average measurement
Die 30-sekündige Mittelwertmessung in Anlehnung an BImSchV während der Abgasmes-
sung kann ein- oder ausgeschaltet werden.
12.12 Auto-Off
With this function, the automatic shutdown can be set to 60s,120s,240s or turned off.
12.13 Language
This function can be used to set a country-specific language configuration.
5695100
24
Edition 01 – May 2022
en
Advertisement
Table of Contents
