Settings - Dräger FG4500 Operating Instructions Manual

12. Settings

The measuring device can be configured according to user's requirements.
The functions are switched on and off via the control panel or switched to the input.
Settings Page 1:
Date and time:
Key beep:
Display:
Show help:
Auto. dayl.-saving:
Wechsel bar -> Pa:
Mit der Pfeiltaste
gewechselt.
Settings Page 2:
Input:
Draft measure.:
Calorific value:
Extend fuel table:
Average measure.:
Language:
5695100
Edition 01 – May 2022
en
Date and time can be set.
The key tone can be switched on or off.
The display illumination can be adjusted.
Built-in help texts can be activated or
can be deactivated.
Automatic conversion of daylight saving
time can be switched on or off.
Pressure unit can be changed
wird zur zweiten Seite der Einstellungen
Input of combustion system data
during exhaust gas measurement, on or off
can be switched.
The train measurement during the exhaust
gas measurement can be switched on or
off.
Consideration of condensing boiler sys-
tems or turn off.
Display of the extended fuel table.
SwitchAverage measurement on or off.
Setting the system language
Operating Instructions Dräger FG4500
22