Table of Contents
Advertisement
Operating Instructions Dräger FG4500
The following can be stored: customer number, name, system type, system place, site num-
ber, street, post code, city, customer name, customer street, customer post code, customer
city, customer phone number, boiler manufacturer, boiler type and year of manufacture,
boiler output, burner manufacturer, burner type and year of manufacture, burner design and
fuel.
The acquired customer number applies to all subsequent measurements until it is switched
off or another number is selected.
6. Flue gas measurement
To perform a complete flue gas measurement, we recommend a measurement time of at
least 2 minutes.
The gas outlet at the side of the device must be free and must not closed or clogged!
6.1 Connecting the flue gas probe
Turn the FG4500 on and press Next.
After the system check, the FG4500 is ready for use. Select Flue
gas measurement in the main menu.
Connect the flue gas probe to the device (see connection dia-
gram). Plug the jack plug of the flue gas probe in the tempera-
ture input T and the quick-release coupling of the flue gas probe
hose into the gas input G of the measuring device. Then press
Next.
6.2 Selecting fuels
Select the desired fuel and accept.
If the pump was shut off before selection of flue gas measurement function, a short stabili-
zation phase will be performed.
5695100
14
Edition 01 – May 2022
en
Advertisement
Table of Contents
