Checking The Movable Parts; Service Every 50 Hours; Lubricating The Grease Fittings [2Wd] - Kubota MX Series Operator's Manual

PERIODIC SERVICE

18. Checking the movable parts

1. If any of the movable parts, such as levers and
pedals, is not smoothly moved because of rust or
sticky material, remove the rust or the sticky
material, and apply oil or grease on the relevant
spot.
Do not force the movable parts into motion.
Otherwise, the machine may get damaged.

SERVICE EVERY 50 HOURS

1. Lubricating the grease fittings
[2WD]
1. Apply a small amount of multipurpose grease to the
following points every 50 hours.
If you have operated the machine in extremely wet
and muddy conditions, lubricate the grease fittings
more often.
130
(1) Grease fitting (knuckle shaft)
[RH, LH]
(2) Grease fitting (top link)
(3) Grease fitting (lifting rod)
[RH]
DAILY CHECK
(4) Grease fitting (top link brack-
et with draft control)(if equip-
ped)
(5) Battery terminals
MX5400,MX6000