5
Installing the Muffler Deflector
Parts needed for this procedure:
1
Muffler deflector
2
Flange nut (3/8 inch)
2
Carriage bolt (3/8 x 1-1/4 inches)
Procedure
Install the muffler deflector to the side of the bagger frame
(Figure
13).
Note: Ensure the muffler deflector is positioned over the
tail pipe of the muffler.
Figure 13
1. Muffler deflector
2. Flange nut (3/8 inch)
6
Routing the Blower Belt into
the Blower Assembly
Parts needed for this procedure:
1
Blower belt (from Blower and Drive Kit)
Procedure
1. For 60- and 72-inch machine decks, install the belt
around the blower pulley
3. Carriage bolt (3/8 x 1-1/4
inches)
(Figure
14).
Blower for 60- and 72-inch machines
1. Idler pulley
2. Machine deck pulley
3. Spring
2. For 48- and 52-inch machines, loosen the belt-guide
bolt
(Figure
15).
3. Install the belt around the blower pulley and fixed-idler
pulley
(Figure
15).
4. Tighten the belt-guide bolt.
1. Idler pulley
2. Machine deck pulley
3. Spring
4. Spring peg
10
Figure 14
4. Spring peg
5. Belt
6. Blower pulley
Figure 15
5. Belt
6. Belt-guide bolt
7. Fixed-idler pulley
8. Blower pulley