Supermicro X13DEG-QT User Manual page 163

device user password to allow you to erase the password and the contents previously stored
in the storage device. Select Security Erase - Without Password to use the manufacturer
default password "111111111" as the storage device user password and allow you to erase the
contents of the storage device by using this default password. The options are Disable, Set
Password, Security Erase - Password, Security Erase - PSID, and Security Erase - Without
Password.
Note: The option of Security Erase - PSID is based on the storage device support.
PSID is the abbreviation for Physical Security Identification.
Password
Use this feature to set the storage device user password which allows you to configure the
Supermicro Security Erase settings by using this user password.
New Password (Available when "Password" above has been set)
Use this feature to set the new user password for the storage device which allows you to
configure the Supermicro Security Erase settings by using this new user password.
Lockdown Mode (Available when the DCMS key is activated)
Select Enabled to support Lockdown Mode that will prevent the existing data or keys stored
in the system from being altered or changed in an effort to preserve system integrity and
security. The options are Disabled and Enabled.
HDD Security Configuration:
P0: (Storage Device Name)
This section is available when the storage device is detected by the BIOS. Select this device.
Press <Enter> and the following information is displayed:
•
HDD Password Description:
•
HDD PASSWORD CONFIGURATION:
•
Security Supported:
•
Security Enabled:
•
Security Locked:
•
Security Frozen:
•
HDD User Pwd Status:
•
HDD Master Pwd Status:
163
Chapter 4: UEFI BIOS